1. Skip to main content

          MIL-COTS DC-DC

          Isolated Regulated

          Products range from the traditional full, half and quarter-brick fully encapsulated DC-DC converter modules to the next generation high-density surface-mount products at less than the size of an equivalent 1/32 brick. The brick family offers thousands of combinations of input voltage, output voltage and power levels. Input voltages range from 10 – 400VDC; output voltages from 1 – 95VDC; output power to 600W. Products can be paralleled for high power solutions. All MI and MIL-COTS converters are suitable for the most harsh environments, with choices of temperature grades providing operation down to -55°C (storage down to -65°C). Products are available to meet key military standards, including ground vehicle and airborne requirements of MIL-STD-1275 and MIL-STD-704; and requirements of MIL-STD-1399 for shipboard systems.

          MIL-COTS DCM?
          Rugged high power converters for 28V and 270V line inputs view products

          270V (160 – 420)
          30V (9 – 50)
          28V (16 – 50)


          3.3, 5, 12, 15, 24, 28, 48V


          4623 ChiP: Up to 500W
          3623 ChiP: Up to 320W
          3714 VIA: Up to 500W
          3414 VIA: Up to 320W
          5614 VIA: Up to 1300W


          4623 ChiP
          1.886 x 0.898 x 0.284in
          47.91 x 22.8 x 7.21mm

          3623 ChiP
          1.524 x 0.898 x 0.284in
          38.72? x ?22.8? x ?7.21mm

          3714 VIA
          3.75 x 1.40 x 0.37in
          95.3 x 35.5 x 9.4mm

          3414 VIA
          3.38 x 1.40 x 0.37in
          85.9 x 35.5 x 9.4mm

          5614 VIA
          5.57 x 1.40 x 0.37in
          141.43 x 35.5 x 9.4mm


          Up to 96%

          MIL-COTS PI31xx
          Sub 60W power converters for 24V, 28V and 48V line inputs VIEW PRODUCTS

          48V (36 – 75V)
          48V (41 – 57V)
          28V (16 – 50V)
          24V (18 – 36V)


          3.3, 5, 12, 15, 18V


          Up to 60W


          0.87 x 0.65 x 0.265in
          22 x 16.5 x 6.7mm


          Up to 89%

          MIL-COTS MPRM? and MVTM?
          Rugged factorized power solutions View Products

          PRM: 38 – 55V
          VTM: 26 – 50V


          PRM: 20 – 55V
          VTM: 1.08 – 50V

          Power / Current:

          PRM: Up to 500W
          VTM: Up to 80A


          PRM: Up to 97%
          VTM: Up to 96.5%


          Full Chip
          32.50 x 22.00 x 6.73mm

          Half Chip
          22.00 x 16.50 x 6.73mm

          MIL-COTS Maxi, Mini, Micro DC-DC Converters
          The DC-DC converter that established the "brick" standard VIEW PRODUCTS

          24V (18 – 36V)
          28V (9 – 36V)
          48V (36 – 75V)
          72V (43 – 110V)
          110V (66 – 154V)
          150V (100 – 200V)
          300V (180 – 375V)
          375V (250 – 425V)


          2 – 54VDC


          Up to 600W


          Maxi full
          2.60 x 2.2 x 0.5mm

          Mini half
          2.28 x 2.2 x 0.5mm

          Micro quarter
          2.28 x 1.45 x 0.5mm

          MI-200? / MI-J00? DC-DC Converters
          Rugged DC-DC converters supporting traditional design VIEW PRODUCTS



          2 – 48VDC


          MI-200: Up to 100W
          MI-J00: Up to 50W


          4.6 x 2.4 x 0.5in
          116.9 x 61.0 x 12.7mm

          2.28 x 2.40 x 0.50in
          57.9 x 61.0 x 12.7mm


          Up to 90%

          Isolated Fixed Ratio

          The MIL-COTS Bus Converter Module (BCM) is a high efficiency (>96%), Sine Amplitude Converter (SAC) operating from MIL-STD-704E/F 270 Vdc and delivering an isolated 25.0 – 50.0VDC , 30.0 – 41.3VDC or 38.3 – 55.0VDC. The BCM is suitable for use with the MIL-COTS PRM–Regulator and VTM–Current Multiplier, and is ideal for aircraft distributed power applications.

          MIL-COTS High-Voltage BCM? Bus Converter
          High-voltage bidirectional bus converters view products

          200 – 400VDC
          400 – 700VDC
          500 – 800VDC

          Current Rating:

          Up to 35A


          Up to 98%


          6123 ChiP package
          2.494 x 0.898 x 0.284in
          63.3 x 22.8 x 7.2mm

          4414 VIA package
          4.35 x 1.40 x 0.37in
          110.55 x 35.54 x 9.40mm

          Non-Isolated Regulated

          Non-isolated Bus Architecture (NBA) is an evolution from IBA necessitated by data center and supercomputing systems. Our converters provide high-efficiency conversion in small packages. Designers can use these converters to integrate 12V loads into new 48V infrastructure or introduce new 48V capabilities into existing 12V infrastructures.

          ZVS Buck
          12V, 24V or 48V direct to point-of-load regulators VIEW PRODUCTS

          12VIN nominal (8 to 18VIN)
          24VIN nominal (8 to 42VIN)
          48VIN nominal (30 to 60VIN)


          Wide output range (1 to 16V)


          Up to 22A


          Up to 98%
          Light load and full load high efficiency performance


          LGA SiP
          10 x 14 x 2.56mm

          BGA SiP
          10.5 x 14.5 x 3.05mm
          10.5 x 10.5 x 3.05mm

          7.0 x 8.0 x 0.85mm

          ZVS Buck-Boost
          Wide range direct to point-of-load regulators with -55°C to +115°C operation VIEW PRODUCTS

          8 – 60V


          10 – 54V


          Up to 200W continuous


          LGA SiP
          10 x 14 x 2.5mm

          BGA SiP
          10.5 x 14.5 x 3.05mm (tin-lead available)


          Over 98% efficiency
          at >800 kHz FSW

          Input Filters

          For your input filtering needs, Vicor provides several families of MIL-COTs input filters. These filters come in a wide range of package options from half-brick to surface mount LGA Systems in Package (SIP). Key military standards met include: conducted emission / conducted susceptibility per MIL-STD-461C/D/E; input transient, surge and spike protection to the most severe levels of MIL-STD-704A-F, MIL-STD-1275A/B/D and DO-160E.

          MIL-COTS MFM™Input filter module for DCMs
          QPIActive EMI filter modules
          MIL-COTS M-FIAM™Rugged input filter module for Mini, Maxi, Macro
          MIL-COTS MI-IAM™Rugged input filter module for VI-200/VI-J00

          Output Filters

          For your output filtering needs, Vicor provides several families of MIL COTS output filters. These filters come in a wide range of package options from half-brick to surface mount LGA Systems in Package (SIP Features include active and passive filtering to achieve greater than 40 dB of noise attenuation from 60 Hz to 1 MHz; reduction of both line frequency related ripple and switching noise to less than 10 mV p-p, DC to 20 MHz.

          MIL-COTS MI-RAM™Rugged output ripple attenuator for VI-200/VI-J00 

          Power System Designer

          Perform a quick product search using the Power System Designer

          Input specifications:

          Output specifications:

          Output specifications:


          Power Seminar

          Expert-led workshops to boost your power conversion knowledge, spring 2020

          Find a location near you


          Contact Form

          Get in touch with Vicor

          Thank you for contacting us

          You should receive a reply to your request within one business day.